Description

A detailed description of the scope and motivation for this project, as well as any relevant resources

As SEF funding has been approved for us to build our own clean-bench, we now need to move into action and make a detailed design, source components and assembled UTAT’s very own clean-bench. Our budget is 3000 CAD.

Tasks

A list of sequential tasks for the project. The project is complete when all tasks are complete

• [ ] Go over the high-level design for the clean-bench in Official Cleanroom Plan | Clean-Table Specifics
• [ ] Make a detailed design of the clean-bench
• [ ] Source component
  • [ ] Hepa filter (make sure it conforms to ISO level 7)
  • [ ] Table
  • [ ] Anything needed to close-off the clean-bench (vinyl wrapping, PVC tubes?)
  • [ ] Any equipment needed (that we don’t have) to conform the cleanroom requirements (gloves, gown…ect)
• [ ] Once everything is sourced, we will need to assemble the clean-bench (most likely at Myhal’s Fabrication Facility, MYFab)
• [ ] Finally, we will need to make a guide and safety manual for use

Notes

Space for research notes, open questions, progress logs

Official Cleanroom Plan | Clean-Table Specifics

Meeting (26/02/2024)

Action Items:

• @Ben Bornstein: look into “flap” design and mounting for the filter
• @BelleLu : look into Hepa Filter (see requirements for ISO level 7 cleanrooms)
• @Max Michet : look into tables & other stuff we need to buy
• @khang nguyen : look into logistics for a place to put the cleanbench in the lab & also UTIAS cleanup?