From David’s email chain with FLIR sales
- this QE chart is not actually the FLIR Tau
- “The QE curve for typical cameras is attached.”
https://groups.google.com/a/utat.ca/g/ss-outreach/c/tH5Vqsf-fRI/m/PX4T5JLLEgAJ
Information on Alignment Pins
| Value |
Measurement (mm) |
CAD (mm) |
| Outer Diameter |
1.52 |
1.58 |
| “Inner”, Chamfered Diameter |
~1 |
1.27 |
| Length |
<10 |
5.72 |
| Length Into Camera |
1.8 |
2.86 |
Information on C-Mount Adapter to Camera Body Screws
- Screws stick out of adapter by 2mm
- If threading bolt in, sticks out 5.3mm above camera surface
- total length of bolt: 13.2mm
- therefore. camera screw hole is about 7.9mm deep, but confirm with spec sheet.